Gamma Titan 200L Ion Pump

Description Gamma Titan 200L Ion Pump Ion Pump Applications The Gamma Titan 200L Ion Pump can create high vacuum and ultra-high vacuum (UHV) environments in a variety of applications, ranging from portable mass spectrometers to large scale particle accelerators. Ion pumps can create the lowest possible vacuum at an economical cost. Ion pump technical advantages over other technologies include: Vibration-Free Operation Low Operational Cost Bakeability Low Maintenance Pressure Indication Permanent Gas Capture Radiation Tolerance Long Operational Life Non-Contaminating Technology CV Element (solid titanium cathodes) Ions impact a titanium cathode directly or at a slight angle. Reactive gases chemically react with the titanium and can either lodge in the cathode or reflect onto the anode as high-energy neutrals, where they then remain. Advantages: high reactive gas pumping, optimal pressure indication, superior electrical stability, superior vacuum stability Disadvantages: low noble gas capacity, lower starting pressures, potential Ar instability How do Ion Pumps work? Ion pumps use a four-step process to remove gases from the vacuum chamber. Step 1: Create a high magnetic field The ion pumps have magnets located outside the vacuum. Those magnets generate a 1200 gauss magnetic field, which contains and guides electrons within circular anode rings. Step 2: Generate a plasma After an initial rough pumping to remove much of the gas, high voltage is applied to the element assembly. Electrons are pulled into the anode tube assembly where they spin in a cloud; this cloud is commonly referred to as plasma. The plasma is trapped by the high magnetic field. Step 3: Ionize gas molecules As gases move into the anode assembly, electrons strike the gas molecules. This collision removes electrons from the gas molecule’s valence shell, and changes the gas molecule into a positive ion (it has a positive charge). The positive ion is forced out of the anode tube by the high voltage field at a high velocity toward the cathode plate. Step 4: Capture gas ions When the positive ion strikes the cathode plate, that impact is called sputtering. Cathode materials are ejected toward the anode tube and the ion chemically and physically reacts with the cathode material.